YATE TREKKER STRETCH 3.8 blue/grey Self-inflating mat

Product detailed description

YATE TREKKER STRETCH is a variant of the popular YATE TREKKER model. The stretch surface removes the unevenness of the base and creates an effect similar to a slatted bed under the body. The outer material is polyester Stretch 50D, which is both resistant to damage and effectively prevents the sleeping bag from sliding. The lightweight core reduces the weight of the product. WARM ZONE - under the back and sides, the foam is relieved only by horizontal channels and therefore there is more foam to ensure sufficient insulation.

REVERSE VALVE It is operated simply without screwing and contains a membrane against back leakage of air during inflation. By turning the cap, the membrane prevents air from entering during blowing. The top cap helps ensure a 100% seal while keeping the cap clean. The larger diameter allows up to 50% faster inflation and deflation of the mat.

This product is covered by an extended warranty (4 years). More in the terms and conditions. The mat comes with a transport case and a repair kit. The pocket for the repair kit is inside the package to avoid damage or loss.

The main advantages of TREKKER models:
- before packing, the mat is folded in half and thereby shrinks its volume after packing
- great comfort
- non-slip surface Micro brushed
- high thermal resistance thanks to thickness 3.8
- REVERSE valve

QUALITY GUARANTEE

Modern products are usually not only nice to look at, but they hide many technical conveniences and details that are not visible, but significantly increase the quality of the product and make it exceptional. 3 factors are the most important for self-inflating mats: 1) low weight, 2) small volume when packed and 3) long service life.

We achieve low weight by choosing the highest quality materials for both the surface and the core. The material must be light, but at the same time strong and durable. Weight reduction is also achieved by lightening the inner foam. But this must not be at the expense of comfort and the ability to insulate well. The choice of material and lightness has a significant effect on the size of the packaged product.

All our products have a double layer of insulation against air leakage, which is laminated to the outer fabric. This ensures high protection and a long product life. Each mat is tested 24 hours after production, thereby eliminating the risk of delivering a defective product from production.

HEAT RESISTANCE

A value that is increasingly being used for mats. Thermal resistance - R is a physical quantity that expresses the thermal insulation properties of the material. It is directly dependent on the material thickness and λ. When achieving the highest possible R value, the goal is to make the material thickness as large as possible and the λ value of the individual materials as low as possible. The thermal resistance R expresses the resistance of 1 m2 of material against the transmission of thermal energy at a temperature difference of 1 K. The coefficient of thermal conductivity λ expresses the property  material to conduct heat. It is the value of energy in W that passes through a material of thickness 1 m at a temperature difference of 1 K between the surfaces of the material. Explanations: R = d / λ (m2.KW-1); d – material thickness (m); λ – Coefficient of thermal conductivity of the material (Wm-1.K-1).

NON-SLIP SURFACE "YATE Micro Brushed"

General product information:
Warranty period: 4 years, Manufacturer: Yate