YATE Shade bag EMF double 16x22 cm, gray

Product detailed description

The shielding bag protects homeopathy  and other sensitive devices with embedded information  against the influence of electromagnetic radiation.

The bag is made of two layers of materials. The outer layer - made of PAD fabric - protects against dirt and damage. The inner protective layer is made of textile  with woven conductive fibers. The electrical conductivity of the fabric causes the bag to behave like a Faraday cage and protects its contents from the effects of high-frequency radiation from the surroundings (electrosmog). The bag has a cap in the upper part. Especially suitable where compliance is required.

Prevents the possibility of theft and misuse of data from contactless payment cards, identification cards, electronic wallets with RFID chip. It protects these and similar sensitive devices from hacker attacks.

The shielding bag can also be used as a mobile phone cover if you want to protect it from unwanted location and eavesdropping. The shielding bag disconnects the phone from any possible connection to the world. It will therefore not be possible to establish contact with the phone, receive or make calls, target its location using GPS satellite systems, target it using triangulation (BTS) or receive messages (SMS, Viber, WhatsApp, Skype...). Shielding does not endanger the phone in any way, but we recommend turning it off or switching it to airplane mode in order not to drain the battery when the device tries to connect back to the network. In this case, it is necessary to use it in combination with the EMF shielding fabric for double shielding. This EMF fabric is not part of the package.

Instructions for use: put the protected object in a bag and secure it with a cap or a bend. We recommend combining with the EMF shielding fabric for double shielding.

Care instructions: clean the shielding bag and the EMF fabric with normal cleaning agents products up to a temperature of 40° C. Do not use products containing chlorine (Savo). Dry freely at a low temperature (do not use a dryer).

Recommendations for EMF textiles: clean as gently as possible and as little as possible - thinner fabric could transmit high-frequency  radiation

Characteristics of the material:   high attenuation of the high-frequency electromagnetic field. Textiles prevent the passage of GSM and CDMA signals (2G,3G,4G LTE), GPS geolocation services (Glonass, Galileo, A-GPS...) and disable data transmissions using WiFi, Bluetooth and NFC.

Material composition:  55% polyester (PES), 21% nickel (Ni), 24% copper (Cu), ripstop

Technical data of the material:

RF attenuation: 75-92 dB at 1 GHz

Thickness   : 0.08-0.09 mm

Weight : 80 g/ m2 +- 10 g/ m2

Resistance : 0.03-0.05 Ohm

General information about the product:

Warranty period 24 months

Manufacturer: YATE spol. s ro

Instructions for use: place the item in the inner protective layer  bag and secure with a cap or fold. We recommend combining with the EMF shading fabric for double shading.

Care instructions:  clean the bag with ordinary cleaning agents up to a temperature of 40° C. Do not use agents containing chlorine (Savo). Dry freely at a low temperature (do not use a dryer).

Characteristics of the material of the inner layer:  high attenuation of the high-frequency electromagnetic field. Textiles prevent the passage of GSM and CDMA signals (2G,3G,4G LTE), GPS geolocation services (Glonass, Galileo, A-GPS...) and disable data transmissions using WiFi, Bluetooth and NFC.

Material composition of the inner layer:  55% polyester (PES), 21% nickel (Ni), 24% copper (Cu), ripstop

Technical data of the inner layer material:

RF attenuation: 75-92 dB at 1 GHz

Thickness   : 0.08-0.09 mm

Weight : 80 g/ m2 +- 10 g/ m2

Resistance : 0.03-0.05 Ohm

General information about the product:

Warranty period 24 months

Manufacturer: YATE spol. s ro