YATE Shield case EMF - 16x13x10 cm, pink

Product detailed description

The shielding case protects homeopathy  and other sensitive devices with embedded information  against the influence of electromagnetic radiation.

The case is made of three layers of materials. Outer layer - from PAD fabric  - protects against dirt and damage.  The second layer - made of polyethylene foam and aluminum foil. Increases the effectiveness of the outer layer against damage. In the upper part, the briefcase is equipped with a zipper and a loop. The inner protective insert is made of textile with woven conductive fibers. The electrical conductivity of the fabric causes the insert to behave like a Faraday cage and protects its contents from the effects of high-frequency radiation from the surroundings (electrosmog).  Prevents the possibility of theft and misuse of data from contactless payment cards, identification cards, electronic wallets with RFID chip. It protects these and similar sensitive devices from hacker attacks.

The shielding case can also be used as a mobile phone case if you want to protect it from unwanted location and eavesdropping. The shielding case disconnects the phone from any possible connection with the world. It will therefore not be possible to establish contact with the phone, receive or make calls, target its location using GPS satellite systems, target it using triangulation (BTS) or receive messages (SMS, Viber, WhatsApp, Skype...). Shielding does not endanger the phone in any way, but we recommend turning it off or switching it to airplane mode in order not to drain the battery when the device tries to connect back to the network. In this case, it must be used in combination with EMF shielding fabric for double shielding. This EMF fabric is not included in the package.

Suitable as a binder for clear organization and use of protected objects and equipment, comfortable to carry. Suitable for travel.

A PU insert can be inserted into the case to prevent damage to the contents when it is half-empty.

Instructions for use: insert the protected object into the internal  inserts and secure by bending  and closing it by carefully covering the insert. We recommend combining it with EMF shielding fabric for double shielding.

Maintenance instructions: shielding case and EMF fabric including inner  clean the inserts with ordinary cleaning agents up to a temperature of 40° C. Do not use agents containing chlorine (Savo). Dry freely at a low temperature (do not use a dryer).

Recommendations for EMF textiles: clean as gently as possible and as little as possible - thinner fabric could transmit high-frequency  radiation.

Material characteristics of the inner  insert: high attenuation of the high-frequency electromagnetic field. Textiles prevent the passage of GSM and CDMA signals (2G,3G,4G LTE), GPS geolocation services (Glonass, Galileo, A-GPS...) and disable data transmissions using WiFi, Bluetooth and NFC.

Material composition of the inner liner: 55% polyester (PES), 21% nickel (Ni), 24% copper (Cu), ripstop

Technical data of the inner liner material:

RF attenuation: 75-92 dB at 1 GHz

Thickness   : 0.08-0 .09 mm

Weight : 80 g/ m2 +- 10 g/ m2

Resistance : 0.03-0.05 Ohm

Color :  golden gray

General information about the product:

Warranty period 24 months

Manufacturer: YATE spol. s ro