YATE Shade pocket large EMF 22x22 cm, burgundy

Shading pocket protects homeopathy  ; and other sensitive devices with embedded information  against the influence of electromagnetic radiation.

The shielding pocket is made of two layers of materials. Outer layer - from PAD fabric  - protects against dirt and damage.  The inner protective layer is made of textile with woven conductive fibers. The electrical conductivity of the fabric causes the pocket to behave like a Faraday cage and protects its contents from the effects of high-frequency radiation from the surroundings (electrosmog). The pocket has a flap with Velcro fasteners. By folding the flap and fixing it with these velcro fasteners (the size of the pocket can also be adjusted with this), the pocket will be sealed tightly. Also suitable for protecting smaller objects.

Prevents the possibility of theft and misuse of data from contactless payment cards, identification cards, electronic wallets with RFID chip. It protects these and similar sensitive devices from hacker attacks.

The shielding pocket can also be used as a mobile phone case if you want to protect it from unwanted location and eavesdropping. The shielding pocket disconnects the phone from any possible connection to the world. It will therefore not be possible to establish contact with the phone, receive or make calls, target its location using GPS satellite systems, target it using triangulation (BTS) or receive messages (SMS, Viber, WhatsApp, Skype...). The shielding does not endanger the phone in any way, but we recommend turning it off or switching it to airplane mode for the reason of not draining the battery when the device tries to connect back to the network. In this case, it must be used in combination with the EMF shielding fabric for double shielding. This EMF fabric is not included in the package.

Instructions for use: insert protected item into the inner protective layer of the pocket and secure its closure by bending the flap and carefully covering the insert. We recommend combining it with the EMF shielding fabric for double shielding.

Care instructions: clean the shielding pocket and the EMF fabric with common cleaning agents up to a temperature of 40°C. Do not use products containing chlorine (Savo). Dry freely at a low temperature (do not use a dryer).

Recommendations for EMF textiles: clean as gently as possible and as little as possible - thinner fabric could transmit high-frequency  radiation.

Characteristics of the material of the inner layer: high attenuation of the high-frequency electromagnetic field. Textiles prevent the passage of GSM and CDMA signals (2G,3G,4G LTE), GPS geolocation services (Glonass, Galileo, A-GPS...) and disable data transmissions using WiFi, Bluetooth and NFC.

Inner layer material composition: 55% polyester (PES), 21% nickel (Ni), 24% copper (Cu), ripstop

Technical data of the inner layer material:

RF attenuation: 75-92 dB at 1 GHz

Thickness   : 0.08-0.09 mm

Weight : 80 g/ m2 +- 10 g/ m2

Resistance : 0.03-0.05 Ohm

General information about the product:

Warranty period 24 months

Manufacturer: YATE spol. s ro