YATE EXTREM LITE 3.8 yellow/grey Self-inflating mat

Product detailed description

YATE EXTREM LITE  it offers great comfort, insulation and material quality, and at the same time low weight. These excellent properties are the main advantages of mummy-shaped mats. They will be appreciated by everyone who walks into nature with a backpack on their back.

Specially developed YATE EXTREM LITE 3.8 model series, where the lowest possible weight and volume after packing is taken into account. But at the same time, these mats provide excellent comfort and insulation capabilities, which are decisive factors for you to rest well and perform at your best even in extreme conditions. Lightweight inner material and mummy shape. WARM ZONE - under the back and sides, the foam is lightened only by horizontal channels and therefore there is more foam to ensure sufficient insulation. When you carry it in your backpack, you don't carry unnecessary extra grams and you can sleep comfortably at the same time. Can be folded in half when packing!

VALVE REVERSE It is operated simply without screwing and contains a membrane against back leakage of air during inflation. By turning the cap, the membrane prevents air from entering during blowing. The top cap helps ensure a 100% seal while keeping the cap clean. The larger diameter allows up to 50% faster inflation and deflation of the mat.

This product is covered by an extended warranty (4 years). More in the terms and conditions. The mat comes with a transport case and a repair kit. The pocket for the repair kit is inside the package to avoid damage or loss.

Main advantages of EXTREM LITE 3.8 models:
- before packing, the mat is folded in half and this reduces its volume after packing
- great comfort
- high thermal resistance thanks to the thickness of 3.8
- REVERSE valve

QUALITY GUARANTEE

Modern products are usually not only nice to look at, but they hide many technical conveniences and details that are not visible, but significantly increase the quality of the product and make it exceptional. 3 factors are the most important for self-inflating mats: 1) low weight, 2) small volume when packed and 3) long service life.

We achieve low weight by choosing the highest quality materials for both the surface and the core. The material must be light, but at the same time strong and durable. Weight reduction is also achieved by lightening the inner foam. But this must not be at the expense of comfort and the ability to insulate well. The choice of material and lightness has a significant effect on the size of the packaged product.

All our products have a double layer of insulation against air leakage, which is laminated to the outer fabric. This ensures high protection and a long product life. Each mat is tested 24 hours after production, thereby eliminating the risk of delivering a defective product from production.

HEAT RESISTANCE

A value that is increasingly being used for mats. Thermal resistance - R is a physical quantity that expresses the thermal insulation properties of the material. It is directly dependent on the material thickness and λ. When achieving the highest possible R value, the goal is to make the material thickness as large as possible and the λ value of the individual materials as low as possible. The thermal resistance R expresses the resistance of 1 m2 of material against the transmission of thermal energy at a temperature difference of 1 K. The coefficient of thermal conductivity λ expresses the property  material to conduct heat. It is the value of energy in W that passes through a material of thickness 1 m at a temperature difference of 1 K between the surfaces of the material. Explanations: R = d / λ (m2.KW-1); d – material thickness (m); λ – Coefficient of thermal conductivity of the material (Wm-1.K-1).

General information about the product:
Warranty period: 4 years, Manufacturer: Yate