YATE CAMPING K620 Stove one plate (for use with 2 kg PB bottle)

Maximum diameter of the container: 250mm

Before use:

IMPORTANT! – Safety requirements

• The stove may only be operated by an adult over the age of 18 according to this manual! When operating the stove, the operator must also respect general fire safety regulations!
• The stove must not be operated by children under any circumstances!
• The stove must be stored out of the reach of children.
• Use in well-ventilated areas, in a closed room it is necessary to ensure sufficient ventilation.
• It is forbidden to use the appliance in rooms and areas below ground level!
• Use the stove only for the purpose for which was manufactured (heating pots with liquids and food)
• Keep the product at a safe distance from flammable materials
• When in use, the cooker must be placed on a non-flammable surface and kept under supervision!
• Make sure all screw connections are tight before use. Carry out the leak check in a well-ventilated workshop, or outdoors, away from sources of ignition/ignition and out of reach of other people!
• The parts of the stove can be very hot! Keep out of the reach of children
• Never use the product if any part of it has been damaged or is missing. Do not use the cooker if it is leaking, damaged or if it is not working properly!
• If your appliance is not leaking (smell of gas), immediately move it outside, to a place without open flames and with good ventilation, where it can be detected and stop this leak. If you want to check the leaks (tightness) of your appliance, do it outdoors. Do not detect leaks with an open flame, use a foaming solution!
• Change the pressurized LPG cylinder outdoors, away from sources of ignition/ignition and out of reach of other people!
• The surface temperature of the gas cylinder must not exceed 40 °C!
• Any direct heating of the pressurized gas cylinder to increase the evaporation power of the liquid gas is prohibited!
• After connecting the cooker to the gas cylinder, avoid tilting, turning and other manipulations with the gas cylinder, which would result in swelling of the liquid PB mixture into the stove burner. After igniting the burner, as a result of the incomplete gasification of the liquid PB mixture, there would be a significant whipping of the blazing flame from the burner. After the liquid gas burns out, the size and intensity of the flame would return to the originally set values. The result is clogging of the nozzle (poor combustion), excessive tanning of stove components, soot formation and a greater risk of fire (the resulting flame cannot be controlled)!
• For safety reasons, do not modify any parts of the stove!
• It is forbidden to convert the appliance to another type of gas!
• it is forbidden to place and use pressurized gas cylinders (even empty ones) in areas below ground level!

1. Connecting the stove to the gas cylinder

Check that the stove control valve is fully closed - close by turning to the right. Before connecting, check that the sealing ring is in order. If it is damaged or missing, do not connect the stove! Check the neck of the bottle for cleanliness. Remove any dirt. If the thread is damaged, the cooker must not be connected to the bottle. Replace the damaged bottle with a perfect one.

Connecting the cooker to the PB bottle is only possible in an outdoor environment, out of reach of people and any source of ignition, i.e. open flame, electric discharge, etc.

Screw the cooker onto the PB bottle. When screwing, hold the cooker by the valve and tighten. When tightening, do not hold the cooker by the hot plate or the burner, as these are connected to the valve by a thread and could loosen it. The cooker has a right-hand thread for the PB bottle, the left-hand thread for the hot plate. If the thread of the cooker or bottle is damaged, the cooker must not be connected to the bottle.

CAUTION: slight gas leakage will occur when tightening and loosening, which is normal. For this reason, however, when tightening and loosening, it is necessary to act quickly and in a well-ventilated place and away from any sources of ignition.

After connecting the stove, make sure that all threads are properly tightened. Make sure the system is tight with soapy water or at least by smell. Never do this with an open flame. If the system shows signs of leakage after connection, disassemble it and check the seals. If you are unable to remove the defect, disassemble the cooker and do not use it! Do not ignite it and do not approach an open fire or any other source of ignition.

The cooker and the PB bottle are equipped with a right-hand thread for mutual connection. When putting the cooker on the bottle, it is necessary to proceed with the necessary care so as not to cross the threads (the so-called "screwing over the thread"), otherwise the cooker will be destroyed due to improper handling.

When screwing on the PB bottle, there is a hiss of gas by opening the bomb valve with the opening pin. A further turn will seat the seal and ensure the tightness of the system.

Further violent, unnecessary tightening leads to rapid wear of the seal! Occasional light smearing of the cooker thread with vaseline will significantly extend its life.

Protect the part that is screwed onto the bottle from contamination so that dirt does not come with the gas to the nozzle and clog it.

2. Ignition and operation

Check that the primary air holes are not dirty or blocked.

Secure the cooker in a vertical position. Turn the gas cap to the left to open the gas supply until you hear a faint hiss. Light the flame with matches, a lighter or flint. After lighting, it takes a while for the flame to settle down. When burning optimally, the flame has a blue-green color. Regulate the strength of the flame by turning the valve to the right or left.

When using a completely full - new PB bottle that has been exposed to heat for a long time, a massive yellowish flame may erupt after lighting the stove . Immediately close the control valve to minimum until the flame subsides. This phenomenon will most certainly occur if the cooker with the bottle is strongly tilted.

During operation, avoid boiling the liquid from the cooking container, otherwise it will be damaged or completely destroyed as well as destroyed stove. Do not leave the stove unattended during operation.

When operating the stove, keep a safe distance from flammable materials - at least 0.5 m.

Do not place flammable objects on the stove.

If you are in doubt about the correct function of the product, do not use it and contact the seller or service.

Stopping operation is done by tightening the control valve to the right until the flame goes out. The cooker can then be disconnected from the PB bottle by unscrewing it to the left. Do not carry out this operation until the cooker has completely cooled down!

The stove must never be removed from the gas cylinder while it is in operation!

Fix the disconnected bottle with a protective cap.

Keep the cooker in a clean and dry environment.

4. Warning for emergency situations

If the flame blows outside the active part of the burner, immediately close the control valve and slightly tighten the bomb cooker. If the flame continues to appear, extinguish it with a stream of water, which you usually have ready for heating. Make sure that no one approaches the stove at a distance of less than 20 m until the gas burns out. Do not use the cooker afterwards!

5. Important notices

Caution: During operation of this appliance, air (oxygen) is consumed and carbon dioxide is produced. Do not ignite or use this appliance in unventilated areas, rooms, tents or vehicles. It is dangerous to use the stove to heat a closed space - there is a risk of inconspicuous carbon monoxide poisoning!

• The stove may only be operated by an adult according to these instructions, do not entrust the operation to children!
• During operation, it is necessary to place the stove in a stable position and keep it under constant supervision.
• Do not use two or more stoves next to each other to heat one container.
• Use only reasonably large and reasonably heavy containers
• Do not use the cooker for purposes other than heating food and drinks in the container.
• Active parts of the stove - burner, container supports, or leeward - they are during operation and about 10 min. then hot, so do not touch them at this time.
• Never use a stove that shows signs of damage or has a defective or worn seal.
• Handle the cooker with care, protect it from falling on the ground and damage
• Do not make any modifications to the cooker.

6. Disassembling, cleaning and assembling the stove

The stove consists of two main parts: the valve body and the burner, which are connected to each other with a thread and sealed with a 17x7x2mm gasket. The disassembly of these parts is necessary in order to clean the nozzle. Even small clogging sharply reduces the performance of the stove.

Do not use needles and pins for cleaning, as this damages the nozzle and may break the tip of the needle in the nozzle and thus destroy the stove. A negative pressure created by the mouth or blowing through is often enough to clean. It is also possible to use very thin wire.

Use a 7 mm wrench to loosen the nozzle.

7. Storage and transport

In principle, store the cooker in a dry, non-aggressive environment.

Always transport the cooker separated from the cartridge.

8. Pressure vessel with gas - PB cylinder

The PB cylinder contains liquefied, highly flammable propane-butane gas under constant pressure. Follow the manufacturer's instructions.

9. Disposal

10. Warranty conditions

The product is provided with a legal warranty of 24 months from the date of sale. This provision does not apply to products damaged by violence, improper handling or unprofessional repair.

11. Normal operational wear

According to the nature and function of the product, it is considered normal operational wear, e.g.:

• Discoloration of the upper stainless steel part of the burner
• Discoloration of the vent plate of the stove, especially in the part near the burner

Some of the above-mentioned changes to the product may become apparent after only a few uses, while this does not reduce the useful value in any way of the product.

Supplied by:

YATE spol. s ro

Brněnská 371

500 06 Hradec Králové

e-mail: yate@yate .cz

Tel: 495 221 475