Stationary crossbar with DIP adapters MARBO MS-U116 2.0

Stationary barbell MARBO MS-U116 2.0 is ideal for training with your own weight, with a large barbell or for training on a punching bag.
The structure is made of steel profile 50 x 50 x 2 mm on precision CNC machines. The chosen material and production process guarantee problem-free assembly, high stability and a load capacity of up to 250 kilograms.

The crossbar has a width of 112 centimeters and can be adjusted in height to 5 positions in the range from 193 to 233 centimeters. The steps are always 10 centimeters apart. The height is secured using a screw with an ergonomic head and a steel locking pin. In the middle of the bar there is a steel eye for hanging, for example, a punching bag.
Included in the delivery are 2 steel hooks for storing the two-handed barbell. The hooks can be adjusted to 7 levels in the range from 72 to 132 cm. The hooks have a pin that is inserted into the hole at the desired height and then the hook is turned, thereby securing it. Thanks to gravity, the hook stays firmly in place, so you don't have to worry about safety even during training with a very heavy barbell. The height range of the hooks is ideal for bench training. The design is compatible with a two-handed barbell that has a grip part longer than 123 centimeters.
Handle supports have a diameter of 3 centimeters and can be placed in 2 levels. The 1st position at a height of 105 centimeters enables the training of dips, the 2nd position at a height of 17 centimeters allows the training of deep push-ups. Each support is equipped with 3 holes for adjusting the spacing (a total of 5 width settings ranging from 56 to 74 cm). Securing the supports is done using a steel securing pin.
On the back of the frame there are spikes that serve as a stand for putting down weights, the spikes are 19 centimeters long and 2.5 cm in diameter. At the same time, suspended weights increase the stability of the structure if it is not anchored to the floor. Under the left strut you will also find an axle stand with a loading part diameter of 30 millimeters.
Stabilizers are equipped with rubber ends, these ends protect the floor from damage and at the same time increase the stability of the structure. The frame can also be anchored to the floor using pre-drilled holes.

Parameters:

• Material: steel, rubber
• Used profile: 50 x 50 x 2 mm
• Construction dimensions:
• length: 119 cm
• height: 196 up to 237 cm
• width: 123 cm
• Bar:
• width: 112 cm
• diameter: 3 cm
• number of positions: 5 (193 - 103 - 113 - 123 - 233 cm)
• Handle supports:
• diameter: 3 cm
• height adjustment: 2 positions (105 and 17 cm)
• width adjustment: 5 combinations (56 - 74 cm)
• Number of barbell hook positions: 7 (72 - 82 - 92 - 102 - 112 - 122 - 132 cm)
• 2 spikes for storing weights (19 x 2.5 cm)
• Axis stand (3 cm)
• Weight: 37 kg
• Load capacity: 250 kg

Warning:

• Certificate, standard: not intended for commercial use
• 24 months warranty