Strength rack MARBO Power Rack MS-U115 2.0

Power Rack MARBO Sport MS-U115 2.0 is ideal for training with your own weight, with a large barbell or for training on a punching bag.

The construction is made of steel profile 50 x 50 x 2 mm on precision CNC machines. The chosen material and manufacturing process guarantee trouble-free assembly, high stability and a load capacity of up to 250 kilograms.

On the upper profile there is a "bar" with a pair of grips, which allow you to train pull-ups with an overhand, underhand and wide grip. The handle is located at a height of 208 cm. In the middle of the bar there is a steel eye for hanging, for example, a punching bag.

On the sides of the frame there are 7 pairs of hooks for storing the weightlifting axis. The hooks have a height range from 73 to 155 cm and the distance between them is 123 cm. The hooks are assisted by safety struts, which have a pin that is inserted into the hole at the required height and then the strut is turned, thereby securing it. Thanks to gravity, the bar stays firmly in place, so you don't have to worry about safety even during training with a very heavy barbell. The struts can be adjusted to 4 positions in the height range from 75 to 118 cm.

On the inside of the frame we can find supports for the handles, they have a diameter of 3 cm and can be placed in 2 levels. The 1st position at a height of 105 centimeters enables the training of dips, the 2nd position at a height of 17 centimeters allows the training of deep push-ups. Each support is equipped with 3 holes for adjusting the spacing (a total of 5 width settings ranging from 56 to 74 cm). The supports are secured using a steel locking pin.

On the back of the frame there are spikes that serve as a stand for placing weights, the spikes are 19 centimeters long and 2.5 cm in diameter. At the same time, suspended weights increase the stability of the structure if it is not anchored to the floor. Under the left strut you will also find an axle stand with a loading part diameter of 30 millimeters. In the front part of the stabilizer there is a so-called mine - a multi-axis joint for training with an axis./p>

The stabilizers are equipped with rubber ends, these ends protect the floor from damage and at the same time increase the stability of the structure. The frame can also be anchored to the floor using pre-drilled holes.

Parameters:

• Material: steel profile 50x50x2 mm
• Dimensions:
• length: 119 cm
• width: 123 cm
• height: 211 cm
• Hooks for barbell storage:
• number of hooks: 7
• height range: 73 - 155 cm
• Handle supports:
• diameter: 3 cm
• height adjustment: 17 and 105 cm
< li>distance: 5 positions, 56 - 74 cm
• Axis diameter: max. 3 cm
• Load capacity: 250 kg
• Weight: 46 kg

Warning:

• Certificate, standard: not intended for commercial use
< li>24 months warranty