Leg-press / Hacken squat HMS LP3175

HMS LP3175 is a Leg-press and Hacken squat combined in one device.

Comfort and safety during training

LP3175 will provide you with maximum comfort during exercise. The backrest is upholstered in synthetic leather and is attached to a steel plate with 3 sturdy pins. Depending on the configuration of the machine, the support is inserted either into the bottom plate in the Leg-press configuration or into the top plate in the Hacken squat configuration. Thanks to this solution, your back will always be pleasantly supported by a comfortable support. The bottom plate is adjustable in 5 positions. Shoulder supports with dimensions of 12 x 39 cm minimize shoulder pressure. The upper and lower worktops are made of non-slip (teardrop) sheet metal, which will keep your feet firmly in place. The machine also has a number of safety features that maximize your safety, such as locks to secure the discs or spring pins. In addition, the handles are coated with anti-slip foam. The frame of the machine is supported by special PVC feet that prevent the device from moving. Thanks to this, you can train without worrying about stability. LP3175 takes care of your safety and you can be sure that it will not move during the training.

Configuration as Leg-press or Hacken squat

For machine use as a Leg-press, you need to place the backrest on the lower plate and raise the upper plate to a vertical position. To raise the plate, simply pull the spring pin hidden in the frame, lift the plate and adjust it so that the spring pin fits into the hole in the sturdy strut.

To use a machine like the Hacken squat, the top plate needs to be brought back to parallel positions and place the backrest on the top plate.

Load settings

The HMS LP3175 allows you to adjust the level of difficulty according to your needs and goals. The sliding platform of the machine is equipped with 4 loading mandrels with a diameter of 50 mm and are therefore ideal for use with Olympic discs. The length of the loading spikes is 33 cm and you can load up to 450 kg of load on them. On the frame of the machine there are 8 additional spikes with a length of 21 cm, on which you can put unused weights, this also achieves additional stabilization of the machine. The load capacity of each storage mandrel is 60 kg.

Silent and smooth operation

The LP3175 has been designed so that the exercise on it is smooth and noiseless. Precise guide bars and strong springs on the block bars of the platform ensure a smoother and ultra-quiet exercise.

Parameters:< /strong>