Product detailed description
The HMS DD401 door bar is the perfect tool for strengthening shoulder, back, abdominal and pectoral muscles. It is made of high-quality stainless steel and is characterized by strength and stability, which guarantees safety during exercise. part, which is provided with an anti-corrosion coating and powder coating. The grips are made of EVA foam, which is very durable, absorbs sweat and ensures a firm grip. Extendable stainless steel rods are inserted into the main part, on which robust, triangular ends with an NBR layer are attached. These robust end caps have several advantages:
- the large surface better distributes the pressure exerted on the frame and they do not deform
- the NBR layer ensures that the crossbar stays firmly in place
- li>
- increase the safety of the bar - even if it was not tightly tightened and it were to loosen, the ends in the door frames will cross and the bar will not fall
- guarantee a load capacity of up to 150 kilograms (taking into account the strength of the door frame )
Safe assembly
After removing the trapeze from the package, the ends are put on its ends. We stretch the crossbar on the ground so that it is a few centimeters shorter than the width of the door frame and secure the length of the crossbar by tightening the black nuts. Insert the DD401 into the door frame, level it using the spirit level supplied and tighten the black nuts. As soon as the trapeze holds, we take out the key from the ends, which we extend using the extension and then tighten the black nuts so that the trapeze holds firmly. We keep the attachment and spirit level for future use, we snap the keys back into the ends and we can start training.
Wide training options
The DD401 bar allows you to perform a wide range of exercises. Depending on whether the bar is placed at head or knee height, pull-ups, push-ups, dips and presses can be trained, allowing you to vary your training and achieve the desired results. Thanks to it, you will increase your strength, endurance and improve your overall fitness.
Parameters: p>
- Material: steel, PP, NBR
- Dimensions:
- length: 98 - 133 cm
- bar diameter: 30 mm
- grip diameter: 38 mm
- end side 13 cm
- Level, assembly key
- Load capacity: 150 kg
- Barbell weight: 2.1 kg
Warning:
- Not intended for commercial use
- 24 month warranty
Be the first who will post an article to this item!
Be the first who will post an article to this item!
Only registered users can submit posts. Please log in or sign up.